Fluke Corporation Visual UpTime Select Multiprotocol T1 CSU DROP & INSERT ASE
I have been watching a csu/dsu that is giving me headaches at a remote site, the carrier appears to be having hardware issues, and I know my equipment is good, here is the show command with the last 16+ hours of logs to view:
Admin> show
APPFILTER
App Filters are DISABLED.
Application FLOWS and SERVERS will be
collected for all hosts in all subnets.
Local Subnets
==================
COMMUNITY
Read-Write Community : private
Public read-only : Yes
Read-Only Community : public
EVENT
Elapsed Time Event Description
------------ -----------------
0d-10:30:23 DLCI 444 is Active
0d-10:30:33 Frame relay link is UP
0d-10:30:43 DLCI 444 is Inactive
0d-10:30:56 Signal change: T1 OK
0d-10:30:59 Signal change: NoFraming
0d-10:31:00 Signal change: RcvYellow NoFraming
0d-10:31:00 Frame relay link is NETWORK DOWN
0d-10:31:08 Signal change: RcvYellow
0d-10:31:09 Signal change: RcvYellow NoFraming
0d-10:31:19 Signal change: RcvYellow
0d-10:31:29 Signal change: T1 OK
0d-10:31:30 Signal change: NoFraming
0d-10:32:29 DLCI 444 is Active
0d-10:32:49 DLCI 444 is Inactive
0d-10:33:02 Signal change: T1 OK
0d-10:33:09 Signal change: NoFraming
0d-10:33:17 Signal change: T1 OK
0d-10:33:27 Signal change: RcvYellow
0d-10:33:28 Signal change: RcvYellow NoFraming
0d-10:34:08 Frame relay link is UP
0d-10:34:19 Frame relay link is NETWORK DOWN
0d-10:34:45 Signal change: RcvYellow
0d-10:35:30 Signal change: T1 OK
0d-10:35:31 Signal change: NoFraming
0d-15:19:29 DLCI 444 is Active
0d-15:19:58 Frame relay link is UP
0d-15:20:08 Frame relay link is ROUTER DOWN
0d-15:20:19 DLCI 444 is Inactive
0d-15:20:21 Signal change: T1 OK
0d-15:20:22 Signal change: NoFraming
0d-15:20:29 Signal change: T1 OK
0d-15:20:30 Signal change: NoFraming
0d-16:13:35 Frame relay link is NETWORK DOWN
0d-16:14:47 Frame relay link is NETWORK DOWN
0d-16:14:52 Signal change: T1 OK
0d-16:14:55 Signal change: NoFraming
0d-16:15:02 Signal change: T1 OK
0d-16:15:03 Signal change: NoFraming
0d-16:15:13 Signal change: T1 OK
0d-16:15:14 Signal change: NoFraming
0d-16:32:37 DLCI 444 is Active
0d-16:33:17 Frame relay link is UP
0d-16:33:21 Signal change: T1 OK
0d-16:33:27 DLCI 444 is Inactive
0d-16:33:32 Signal change: RcvYellow
0d-16:33:33 Signal change: RcvYellow NoFraming
0d-16:33:40 Signal change: RcvYellow
0d-16:33:42 Signal change: RcvYellow NoFraming
0d-16:33:45 Frame relay link is NETWORK DOWN
FRAME
Link Statistics
Near Octets: 2897783972 Far Octets: 3464883931
Near Frames: 21832141 Far Frames: 21945249
Near Frame Errors: 22 Far Frame Errors: 290967
Near Aborted Frames: 0 Far Aborted Frames: 406020
Near Short Frames: 0 Far Short Frames: 130517
Near Long Frames: 0 Far Long Frames: 0
Current Utilization: 24.63 Current Utilization: 59.82
Maximum Utilization: 69.62 Maximum Utilization: 88.28
Current Frames/sec: 172 Current Frames/sec: 111
Maximum Frames/sec: 266 Maximum Frames/sec: 278
Drop Events: 0
Link State: Up
Port Unavailable Secs: 5994
Frame Relay LMI is working correctly.
1 frame relay circuits were reported.
All circuits are ACTIVE.
ID
Visual UpTime Select Multiprotocol T1 CSU DROP & INSERT ASE
Software version: M 2.0.023 - Feb 07 2006
Serial Number: 0049-0000000
Installed memory: 64M
Protected by U.S. patents: 5,867,483; 5,521,907; 6,058,102;
6,147,998; and 6,564,214.
This product may also be protected by other U.S. or foreign patents.
Copyright (c) 2006 Fluke Corporation(R).
All Rights Reserved.
LAN interface IP Address: 192.168.1.231
LAN interface Subnet Mask: 255.255.255.240
INBAND interface IP Address: NONE
INBAND interface Subnet Mask: 255.255.255.255
Default Router IP Address: 192.168.1.229
Running for 6 days 17 hours 26 minutes 14 seconds
INBAND
In-band communication: NONE
LMIsolate: INITIAL
Router timeout: 30
IP
Management IP address: 192.168.1.231
Management IP subnet mask: 255.255.255.240
SLIP interface address: NONE
SLIP interface subnet mask: 255.255.0.0
Primary router address: 192.168.1.229
IP Statistics
In Receives: 2581 Out Requests: 2773
In Delivers: 2581 Out Discards: 0
In Header Errors: 0 Out No Routes: 0
In Address Errors: 0 Reassemble Requests: 0
In Unknown Protocols: 0 Reassemble Oks: 0
In Discards: 0 Reassemble Fails: 0
Datagrams Fragmented: 0 Forwarded Datagrams: 0
Fragments Created: 0
Fragment Fails: 0
LINK
Link interface type: Frame
LOOP
T1 Network Loopback: None
Data Port Loopback: None
PASSWD
SECURITY
The security table is empty
Host address security is DISABLED
SERIAL
Console/SLIP speed : 19200
SITE
NAME:
LOCATION:
CONTACT:
SLA
Inter-ASE messaging: OFF
SLIP
Connection Type : Dial
STATUS
This ASE has been running for 6d-17:26:15.
T1 network side interface: OK.
V.35 data side interface: OK.
Frame Relay LMI is working correctly.
T1
Network Coding : B8ZS
Network Framing : ESF
Network Line Build Out : 0 dB
Network FDL Protocol : AT&T TR54016
Network Timing : Loop
Data Channel Rate : 64K
Data Channels : 1-24 (1536K)
DSX1 Coding : B8ZS
DSX1 Framing : ESF
DSX1 Channels : NONE
DSX1 Line Build Out : 133 feet
Network DSX1
------- ----
Signal OK Disabled
Excess Zeros OK Disabled
Frame Sync OK Disabled
Yellow Alarm Rx No No
Yellow Alarm Tx No No
Blue Alarm Rx No No
Blue Alarm Tx N/A No
Looped Back No No
B8ZS Detected Yes No
BPVs 0 0
CRC Errors 0 0
SESs 0 0
ESs 0 0
ESBs 0 0
Unavail Secs 0 0
Frame Slips 0 0
V35
Transmit Clock Source : SCT
Polarity: Normal
RLSD : Normal
Rate : 1536 Kbps
Activity: SD: Yes RD: Yes SCLK: Yes RCLK: Yes
Signals: RTS: Yes CTS: Yes DSR: Yes RLSD: Yes
DTR: Yes LL: No
Admin>
Leave a comment