Checking Ports On A Cisco Catalyst 6500 Cat6000 Switch
I was asked to check the speed on a Catalyst 6500 Series Switch.
switch01> (enable) show version
WS-C6509 Software, Version NmpSW: 6.4(16)
Copyright (c) 1995-2005 by Cisco Systems
NMP S/W compiled on Apr 6 2005, 19:15:11
System Bootstrap Version: 5.3(1)
System Web Interface Version: Engine Version: 5.3.4 ADP Device: Cat6000 ADP Version: 1.9 ADK: 40
Hardware Version: 3.0 Model: WS-C6509 Serial #:
PS1 Module: WS-CAC-2500W Serial #:
PS2 Module: WS-CAC-2500W Serial #:
Mod Port Model Serial # Versions
--- ---- ------------------- ----------- --------------------------------------
1 2 WS-X6K-SUP1A-2GE Hw : 7.1
Fw : 5.3(1)
Fw1: 5.4(2)
Sw : 6.4(16)
Sw1: 6.4(16)
WS-F6K-PFC Hw : 1.1
2 2 WS-X6K-SUP1A-2GE Hw : 7.1
Fw : 5.3(1)
Fw1: 5.4(2)
Sw : 6.4(16)
Sw1: 6.4(16)
WS-F6K-PFC Hw : 2.0
3 48 WS-X6348-RJ-45 Hw : 5.0
Fw : 5.4(2)
Sw : 6.4(16)
4 48 WS-X6348-RJ-45 Hw : 5.0
Fw : 5.4(2)
Sw : 6.4(16)
5 16 WS-X6316-GE-TX Hw : 1.2
Fw : 5.4(2)
Sw : 6.4(16)
6 16 WS-X6316-GE-TX Hw : 1.2
Fw : 5.4(2)
Sw : 6.4(16)
7 16 WS-X6316-GE-TX Hw : 1.2
Fw : 5.4(2)
Sw : 6.4(16)
9 48 WS-X6348-RJ-45 Hw : 1.5
Fw : 5.4(2)
Sw : 6.4(16)
15 1 WS-F6K-MSFC2 Hw : 1.2
Fw : 12.1(22)E1
Sw : 12.1(22)E1
16 1 WS-F6K-MSFC2 Hw : 2.1
Fw : 12.1(19)E1
Sw : 12.1(19)E1
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 65408K 53678K 11730K 16384K 15466K 918K 512K 354K 158K
Uptime is 42 days, 14 hours, 29 minutes
switch01> (enable) show port 7/14
Port Name Status Vlan Duplex Speed Type
----- -------------------- ---------- ---------- ------ ----- ------------
7/14 server01 (2) notconnect 400 full 1000 1000BaseT
Port Security Violation Shutdown-Time Age-Time Max-Addr Trap IfIndex
----- -------- --------- ------------- -------- -------- -------- -------
7/14 disabled shutdown 0 0 1 disabled 285
Port Num-Addr Secure-Src-Addr Age-Left Last-Src-Addr Shutdown/Time-Left
----- -------- ----------------- -------- ----------------- ------------------
7/14 0 - - - - -
Port Broadcast-Limit Multicast Unicast Total-Drop
-------- --------------- --------- ------- --------------------
7/14 - - - 0
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
----- -------- -------- --------- --------- ---------- ----------
7/14 desired off off off 0 0
Port Status Channel Admin Ch
Mode Group Id
----- ---------- -------------------- ----- -----
7/14 notconnect off 224 0
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize
----- ---------- ---------- ---------- ---------- ---------
7/14 0 0 0 0 0
Port Single-Col Multi-Coll Late-Coll Excess-Col Carri-Sen Runts Giants
----- ---------- ---------- ---------- ---------- --------- --------- ---------
7/14 0 0 0 0 0 0 0
Port Last-Time-Cleared
----- --------------------------
7/14 Mon Mar 27 2006, 00:03:32
I can tell from the settings above in bold that this port is configured for Full Duplex and 1000Mbit operation.
The Catalyst 6500 Series delivers highly available secure converged network services for Enterprise and Service Provider networks. Designed to address the increased requirements for gigabit scalability, high-availability, rich services, and multilayer switching in backbone, distribution, and wiring closet topologies as well as datacenter environments, the Catalyst 6500 Series delivers exceptional scalability and price/performance, supporting a wide range of interface densities, performance, and integration of powerful services modules.
Leave a comment