HP Pavillion ze2308wm Notebook Computer with linux

By klsh on November 24, 2005 8:11 AM | | Comments (3) | TrackBacks (0)

Details on running linux...to follow. I bought this computer and will put some photos up real soon.
so far the screen is sharp, bright and big. (15 inch wow)

I still need to benchmark... i'm going to set this up as a dual boot. so looking at using ubuntu and keep the windows xp home edition (yech)

Update! 1GB PC3200 DDR 400MHZ 200PIN SODIMM 2.5V CL3 UNBUFF NON-ECC is the compatible memory upgrade for this machine!


for updates on hardware and upgrades see this thread:
Unofficial HP Pavillion ZE2308WM (WalMart BF '05 Laptop) Support Thread

  • AMD Mobile Sempron
  • 2800+ processor 1.6Ghz
  • 256MB DDR SDRAM
  • 40 GB
  • CD-RW/DVD-ROM Combo drive
  • 54G 802.11b/g wireless
  • 15 inch tft-xga screen
HP Pavilion ze2308wm notebook label HP Pavilion ze2308wm notebook open box HP Pavilion ze2308wm notebook HP Pavilion ze2308wm notebook HP Pavilion ze2308wm notebook HP Pavilion ze2308wm notebook HP Pavilion ze2308wm notebook HP Pavilion ze2308wm notebook side view HP Pavilion ze2308wm notebook top view HP Pavilion ze2308wm notebook ports view HP Pavilion ze2308wm notebook battery HP Pavilion ze2308wm notebook discs HP Pavilion ze2308wm notebook
CPU and BIOS info Processor Model : Mobile AMD Sempron(tm) Processor 2800+ Speed : 1.59GHz Model Number : 2800 (estimated) Performance Rating : PR2388 (estimated) Cores per Processor : 1 Unit(s) Threads per Core : 1 Unit(s) Type : Mobile Package : FC µPGA754 Multiplier : 8/1x Minimum/Maximum Multiplier : 4/1x / 8/1x Generation : G8 Name : M2C-DH Sempron (K8 Palermo) 90nm 1.4GHz-2.2 1.45-1.55V Revision/Stepping : 2C / 2 (8C4) Stepping Mask : DH-E6 Core Voltage Rating : 1.300V Min/Max Core Voltage : 1.075V / 1.350V Maximum Physical / Virtual Addressing : 40-bit / 32-bit Native Page Size : 4kB

Co-Processor (FPU)
Type : Built-in
Revision/Stepping : 2C / 2 (8C4)

Processor Cache(s)
Internal Data Cache : 64kB Synchronous, Write-Back, 2-way set, 64 byte line size
Internal Instruction Cache : 64kB Synchronous, Write-Back, 2-way set, 64 byte line size
L2 On-board Cache : 256kB ECC Synchronous, Write-Back, 16-way set, 64 byte line size
L2 Cache Multiplier : 1/1x (1592MHz)

Processor Power Management
Processor Throttling Enabled : Yes
Throttle Range : 12% - 100%

Features
FPU - Co-Processor Built-in : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange 8-bytes Instruction : Yes
APIC - Local APIC Built-in : Yes
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : Yes
DS - Debug Trace & EMON Store : No
ACPI - Software Clock Control : No
(W)MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : Yes
SSE2 Technology : Yes
SS - Self Snoop : No
HTT - Hyper-Threading Technology : No
TM - Thermal Monitor : No
PBE - Pending Break Enable : No
IA64 Technology : No
SSE3 Technology : Yes
MON - Monitor/MWait : No
DSCPL - CPL qualified Debug Store : No
VMX - Virtual Machine eXtensions : No
EST - Enhanced SpeedStep Technology : No
TM2 - Thermal Monitor 2 : No
SSE4 Technology : No
CID - Context ID : No
CX16 - Compare & Exchange 16-bytes Instruction : No
xTPR - Send Task Priority Messages : No
DAZ - Denormals Are Zero : Yes

Extended Features
SYCR - Extended Fast System Call : Yes
EMMX - Extended MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
FXSR - Instructions Optimisation : Yes
3DNow! Technology : Yes
Extended 3DNow! Technology : Yes
XD/NX - No-execute Page Protection : Yes
AMD64/EM64T Technology : No
LAHF/SAHF - Support in 64-bit : Yes
CMP - Multi-Core Legacy Mode : No
SVM - Secure Virtual Machine : No

Power Management Features
STC - Software Thermal Control : Yes
TM - Thermal Monitor : Yes
TTP - Thermal Trip : Yes
VID - Voltage Control : Yes
FID - Frequency Control : Yes
TS - Thermal Sensor Built-in : Yes

Advanced Settings
System Ack Limit : 1 request(s)
System Victim Limit : 0 request(s)
Extended MTRR Types : Yes
I/O Type Range Registers : Yes
Top of Memory : 10000000 (256MB)

Machine Check Architecture Settings
Number of Reporting Banks : 5 bank(s)
Exception Reporting Control Support : Yes

Variable Range MTRR Settings
MTRR 0 : 00000000-0FFFFFFF (0MB-256MB) WB
MTRR 1 : 0E000000-0FFFFFFF (224MB-256MB) UC

Variable Range IORR Settings

Fixed Range MTRR Settings
MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB rdIO wrIO
MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB rdIO wrIO
MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB rdIO wrIO
MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB rdIO wrIO
MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB rdIO wrIO
MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB rdIO wrIO
MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB rdIO wrIO
MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB rdIO wrIO
MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB rdIO wrIO
MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB rdIO wrIO
MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB rdIO wrIO
MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB rdIO wrIO
MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB rdIO wrIO
MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB rdIO wrIO
MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB rdIO wrIO
MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB rdIO wrIO
MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC rdIO wrIO
MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC rdIO wrIO
MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC rdIO wrIO
MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC rdIO wrIO
MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC rdIO wrIO
MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC rdIO wrIO
MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC rdIO wrIO
MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC rdIO wrIO
MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) WP rdIO wrIO
MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) WP rdIO wrIO
MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) WP rdIO wrIO
MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) WP rdIO wrIO
MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) WP rdIO wrIO
MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) WP rdIO wrIO
MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) WP rdIO wrIO
MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) WP rdIO wrIO
MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) WP rdIO wrIO
MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) WP rdIO wrIO
MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) WP rdIO wrIO
MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) WP rdIO wrIO
MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) WP rdIO wrIO
MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) WP rdIO wrIO
MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) WP rdIO wrIO
MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) WP rdIO wrIO
MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) WP rdIO wrIO
MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) WP rdIO wrIO
MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) WP rdIO wrIO
MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) WP rdIO wrIO
MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC rdIO wrIO
MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC rdIO wrIO
MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC rdIO wrIO
MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC rdIO wrIO
MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC rdIO wrIO
MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC rdIO wrIO
MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC rdIO wrIO
MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC rdIO wrIO
MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) WP rdIO wrIO
MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) WP rdIO wrIO
MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) WP rdIO wrIO
MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) WP rdIO wrIO
MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) WB rdIO wrIO
MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) WB rdIO wrIO
MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) WB rdIO wrIO
MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) WB rdIO wrIO
MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) WP rdIO wrIO
MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) WP rdIO wrIO
MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) WP rdIO wrIO
MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) WP rdIO wrIO
MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) WP rdIO wrIO
MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) WP rdIO wrIO
MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) WP rdIO wrIO
MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) WP rdIO wrIO
MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) WP rdIO wrIO
MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) WP rdIO wrIO
MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) WP rdIO wrIO
MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) WP rdIO wrIO
MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WP rdIO wrIO
MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WP rdIO wrIO
MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WP rdIO wrIO
MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WP rdIO wrIO
MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WP rdIO wrIO
MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WP rdIO wrIO
MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WP rdIO wrIO
MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WP rdIO wrIO
MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WP rdIO wrIO
MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WP rdIO wrIO
MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WP rdIO wrIO
MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WP rdIO wrIO
MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WP rdIO wrIO
MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WP rdIO wrIO
MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WP rdIO wrIO
MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WP rdIO wrIO

PAT Settings
PAT 0 : WB
PAT 1 : WC
PAT 2 : UC-
PAT 3 : UC
PAT 4 : WB
PAT 5 : WC
PAT 6 : UC-
PAT 7 : UC

Memory Bandwidth Test

Benchmark Results
RAM Bandwidth Int Buff'd iSSE2 : 1976 MB/s
RAM Bandwidth Float Buff'd iSSE2 : 1981 MB/s
Results Interpretation : Higher index values are better.

Int Buff'd iSSE2 (Integer STREAM) Results Breakdown
Assignment : 1947MB/s
Scaling : 1941MB/s
Addition : 2007MB/s
Triad : 2010MB/s
Data Item Size : 16 byte(s)
Buffering Used : Yes
Offset Displacement Used : Yes
Bandwidth Efficiency : 124% (estimated)

Float Buff'd iSSE2 (Float STREAM) Results Breakdown
Assignment : 1949MB/s
Scaling : 1946MB/s
Addition : 2012MB/s
Triad : 2017MB/s
Data Item Size : 16 byte(s)
Buffering Used : Yes
Offset Displacement Used : Yes
Bandwidth Efficiency : 124% (estimated)

Performance Test Status
Run ID : PAVILION on Friday, November 25, 2005 at 6:37:04 PM
Memory Used by Test : 111MB
NUMA Support : No
SMP Test : No
Total Test Threads : 1
Multi-Core Test : No
SMT Test : No
Dynamic MP/MT Load Balance : No
Processor Affinity : P0C0T0
Page Size : 4kB
Use Large Memory Pages : No

Chipset 1
Model : Hewlett-Packard Company ??? (5950)
Front Side Bus Speed : 2x 796MHz (1592MHz data rate)
In/Out Width : 16-bit / 16-bit
Maximum Bus Bandwidth : 6368MB/s (estimated)

Logical/Chipset 1 Memory Banks
Channels : 1
Speed : 2x 199MHz (398MHz data rate)
Width : 32-bit
Maximum Memory Bus Bandwidth : 1592MB/s (estimated)

Chipset 2
Model : Advanced Micro Devices (AMD) Athlon 64 / Opteron HyperTransport Technology Configuration
Front Side Bus Speed : 2x 796MHz (1592MHz data rate)
In/Out Width : 16-bit / 16-bit
Maximum Bus Bandwidth : 6368MB/s (estimated)

Logical/Chipset 2 Memory Banks
Bank 2 : 128MB DDR-SDRAM 2.5-3-3-7 1CMD
Bank 3 : 128MB DDR-SDRAM 2.5-3-3-7 1CMD
Channels : 1
Bank Interleave : 2-way
Speed : 2x 159MHz (318MHz data rate)
Width : 64-bit
Maximum Memory Bus Bandwidth : 2544MB/s (estimated)

Features
(W)MMX Technology : Yes
SSE Technology : Yes
SSE2 Technology : Yes
EMMX - Extended MMX Technology : Yes
HTT - Hyper-Threading Technology : No

Cache Memory Benchmark

Benchmark Results
Combined Index : 3118 MB/s
Speed Factor : 10.3
2kB Blocks : 11489 MB/s
4kB Blocks : 12045 MB/s
8kB Blocks : 12319 MB/s
16kB Blocks : 12283 MB/s
32kB Blocks : 10725 MB/s
64kB Blocks : 10033 MB/s
128kB Blocks : 7655 MB/s
256kB Blocks : 6639 MB/s
512kB Blocks : 1302 MB/s
1MB Blocks : 1205 MB/s
4MB Blocks : 1201 MB/s
16MB Blocks : 1200 MB/s
64MB Blocks : 1202 MB/s
Results Interpretation : Higher index values are better.

Float SSE2 Cache/Memory Results Breakdown
Data Item Size : 16 byte(s)
Buffering Used : No
Offset Displacement Used : Yes

Performance Test Status
Run ID : PAVILION on Friday, November 25, 2005 at 6:43:08 PM
NUMA Support : No
SMP Test : No
Total Test Threads : 1
Multi-Core Test : No
SMT Test : No
Dynamic MP/MT Load Balance : No
Processor Affinity : P0C0T0
Page Size : 4kB
Use Large Memory Pages : No

Processor
Model : Mobile AMD Sempron(tm) Processor 2800+
Speed : 796MHz
Model Number : 2800 (estimated)
Performance Rating : PR1194 (estimated)
Cores per Processor : 1 Unit(s)
Type : Mobile
Internal Data Cache : 64kB Synchronous, Write-Back, 2-way set, 64 byte line size
L2 On-board Cache : 256kB ECC Synchronous, Write-Back, 16-way set, 64 byte line size

Features
SSE Technology : Yes
SSE2 Technology : Yes
EMMX - Extended MMX Technology : Yes
HTT - Hyper-Threading Technology : No

Chipset 1
Model : Hewlett-Packard Company ??? (5950)
Front Side Bus Speed : 2x 796MHz (1592MHz data rate)
In/Out Width : 16-bit / 16-bit
Maximum Bus Bandwidth : 6368MB/s (estimated)

Logical/Chipset 1 Memory Banks
Channels : 1
Speed : 2x 199MHz (398MHz data rate)
Width : 32-bit
Maximum Memory Bus Bandwidth : 1592MB/s (estimated)

Chipset 2
Model : Advanced Micro Devices (AMD) Athlon 64 / Opteron HyperTransport Technology Configuration
Front Side Bus Speed : 2x 796MHz (1592MHz data rate)
In/Out Width : 16-bit / 16-bit
Maximum Bus Bandwidth : 6368MB/s (estimated)

Logical/Chipset 2 Memory Banks
Bank 2 : 128MB DDR-SDRAM 2.5-3-3-7 1CMD
Bank 3 : 128MB DDR-SDRAM 2.5-3-3-7 1CMD
Channels : 1
Bank Interleave : 2-way
Speed : 2x 159MHz (318MHz data rate)
Width : 64-bit
Maximum Memory Bus Bandwidth : 2544MB/s (estimated)

Performance Tips
Notice 5008 : To change benchmarks, click Options.
Notice 5004 : Synthetic benchmark. May not tally with 'real-life' performance.
Notice 5006 : Only compare the results with ones obtained using the same version!

File system benchmark

Benchmark Results
Drive Index : 23 MB/s
Results Interpretation : Higher index values are better.

Performance Test Status
Run ID : PAVILION on Friday, November 25, 2005 at 6:48:47 PM
SMP Test : No
Total Test Threads : 1
SMT Test : No
Dynamic MP/MT Load Balance : No
Processor Affinity : No
Operating System Disk Cache Used : No
Use Overlapped I/O : Yes
IO Queue Depth : 4 request(s)
Test File Size : 223MB
File Fragments : 1
Block Size : 1MB
File Server Optimised : No

Benchmark Breakdown
Buffered Read : 86 MB/s
Sequential Read : 27 MB/s
Random Read : 19 MB/s
Buffered Write : 21 MB/s
Sequential Write : 22 MB/s
Random Write : 19 MB/s
Average Access Time : 15 ms (estimated)

Drive
Drive Type : Hard Disk
Total Size : 37GB
Free Space : 28GB, 74%

Categories:

0 TrackBacks

Listed below are links to blogs that reference this entry: HP Pavillion ze2308wm Notebook Computer with linux.

TrackBack URL for this entry: http://kennethhunt.com/mt/mt-tb.cgi/1599

3 Comments

Kenneth said:

knoppix@0[knoppix]$ dmesg
Linux version 2.6.12 (root@Knoppix) (gcc-Version 3.3.6 (Debian 1:3.3.6-7)) #2 SMP Tue Aug 9 23:20:52 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000027ef0000 (usable)
BIOS-e820: 0000000027ef0000 - 0000000027eff000 (ACPI data)
BIOS-e820: 0000000027eff000 - 0000000027f00000 (ACPI NVS)
BIOS-e820: 0000000027f00000 - 0000000030000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
638MB LOWMEM available.
found SMP MP-table at 000f8340
On node 0 totalpages: 163568
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 159472 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 HP ) @ 0x000f8290
ACPI: RSDT (v001 HP 3096 0x20040804 LTP 0x00000000) @ 0x27ef8c06
ACPI: FADT (v001 HP 3096 0x20040804 PTL 0x0000005f) @ 0x27efee41
ACPI: SSDT (v001 PTLTD POWERNOW 0x20040804 LTP 0x00000001) @ 0x27efeeb5
ACPI: MADT (v001 PTLTD 3096 0x20040804 LTP 0x00000000) @ 0x27efef6a
ACPI: MCFG (v001 PTLTD MCFG 0x20040804 LTP 0x00000000) @ 0x27efefc4
ACPI: DSDT (v001 HP 3091 0x20040804 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 30000000:cec00000)
Built 1 zonelists
Kernel command line: ### isk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1592.812 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 642392k/654272k available (1882k kernel code, 11312k reserved, 999k data, 296k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3137.53 BogoMIPS (lpj=1568768)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000010 00000001 00000000 00000001
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
CPU0: AMD Mobile AMD Sempron(tm) Processor 2800+ stepping 02
Total of 1 processors activated (3137.53 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 845k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=5
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
ACPI: Embedded Controller [EC0] (gpe 24)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
pnp: 00:07: ioport range 0x220-0x22f has been reserved
pnp: 00:07: ioport range 0x40b-0x40b has been reserved
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
audit: initializing netlink socket (disabled)
audit(1133904500.098:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xc8000000, mapped to 0xe8880000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=84
vesafb: protected mode interface info at c000:53b7
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HTS424040M9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.11 loaded.
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 15
ACPI wakeup devices:
KBC0 MSE0 P2P AUDO
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
input: AT Translated Set 2 keyboard on isa0060/serio0
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc)
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc)
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1)
Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev hda.
FAT: invalid media value (0x01)
VFS: Can't find a valid FAT filesystem on dev hda.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.02
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 30344 blocks, 65536 bytes/block, largest block is 65552 bytes.
ISO 9660 Extensions: RRIP_1991A
Registering unionfs 20050921-1517
Freeing unused kernel memory: 296k freed
Real Time Clock Driver v1.12
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (51 C)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 17 (level, low) -> IRQ 17
Yenta: CardBus bridge found at 0000:05:09.0 [103c:3091]
Yenta: ISA IRQ mask 0x0ee8, PCI irq 17
Socket status: 30000410
cs: IO port probe 0xc00-0xcff: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x100-0x4ff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
orinoco 0.15rc2STA (David Gibson , Pavel Roskin , et al)
orinoco_cs 0.15rc2STA (David Gibson , Pavel Roskin , et al)
eth0: Hardware identity 0001:0004:0005:0000
eth0: Station identity 001f:0001:0008:0048
eth0: Firmware determined as Lucent/Agere 8.72
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:02:2D:BF:66:E0
eth0: Station name "HERMES I"
eth0: ready
eth0: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
eth0: New link status: Connected (0001)
NET: Registered protocol family 17
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
eth0: New link status: Connected (0001)
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
eth1: RealTek RTL8139 at 0xe8c8a000, 00:c0:9f:e6:28:7a, IRQ 18
eth1: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
NTFS driver 2.1.22 [Flags: R/W MODULE].
NTFS volume version 3.1.
eth1: link down
eth0: New link status: Connected (0001)
Linux agpgart interface v0.101 (c) Dave Jones
apm: BIOS not found.
eth0: New link status: Disconnected (0002)
eth0: New link status: Connected (0001)
eth0: New link status: Connected (0001)
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0381d00(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
APIC error on CPU0: 00(40)
APIC error on CPU0: 40(40)

December 6, 2005 9:36 PM
scott said:

Did you get the wifi working i've heard of people having problems. Also what distro are you using.

Scott

December 5, 2005 9:16 PM
Zach said:

Any luck getting linux up and running? I can get everything to work except the touchpad.

December 3, 2005 1:37 AM

About this Entry

This page contains a single entry by klsh published on November 24, 2005 8:11 AM.

xbox crashing the 360 crashes mid-game was the previous entry in this blog.

memory upgrade for the HP Pavilion ze2308wm Notebook is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.